Colorado Springs Auto Repair

If you drive a vehicle with a gasoline engine, thank the spark plugs for igniting the gasoline/air mixture in each cylinder that keeps your vehicle traveling smoothly down the road every day.  Your spark plugs work hard, firing thousands of times in a well-choreographed order, and you usually don't pay much attention to them until one of them stops working the way it should. Signs that spark plugs are wearing out include: Engine runs more roughly than it did Vehicle doesn't start as easily as it used to Vehicle hesitates when you press on the accelerator Your fuel economy has gotten worse When a spark plug stops working altogether, you will find your engine has likely lost a lot of its power and isn't running smoothly.  Your Check Engine light may  come on.  Then it's time to head to come to our service center to have it diagnosed. If your plugs need to be replaced, they're usually done all at the same time. And if your vehicle has spark plug wires, experts recomm ... read more

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape.  Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly. These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they ... read more

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you. You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked. What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edg ... read more

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short. This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road.  It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gaso ... read more